STEEL BOLLARDS · PARKING & ASSET PROTECTIONqianyi0576@163.com
Application concept

Products

In-ground bollards

QY-IGSS01

Flat-top stainless steel sleeve bollard

A round 304 or 316 stainless steel bollard for a pre-installed ground sleeve. Release the three lower fixing screws to remove the visible post. Choose the Ø219 or Ø300 mm configuration, or specify a custom height.

Key Features

  • Flat top
  • Pre-installed ground sleeve
  • Three lower fixing screws
  • In-ground sleeve with screw-retained post
Model 3 reference series
Download Specification & range files

Reference files for quotation. An approved product drawing is agreed separately.

Enquire about this product

Product Details

Description

A round 304 or 316 stainless steel bollard for a pre-installed ground sleeve. Release the three lower fixing screws to remove the visible post. Choose the Ø219 or Ø300 mm configuration, or specify a custom height.

An embedded post needs a clear distinction between the visible height and the length below ground. Bring both dimensions into the installation drawing.

  • Exposed height and overall post length
  • Embedment, foundation and buried-service conditions
  • Cap detail, corrosion protection and ground finish

Confirm the selected factory cap profile, original colour, joining and finishing method, and any handle or ring against the assembly drawing. The pictured configuration and the reference specification should be reviewed together.

Product Specifications

Reference configurations for quotation. Final dimensions, materials and supply are subject to drawing and quotation confirmation.

ConfigurationMaterialFinishDiameter (mm)Reference height (mm)Wall (mm)TopFixing
Sleeve-219.1050.3304 / 316 stainless steelBrushed satin21910503Flat3 lower screws
Sleeve-300.1050.3304 / 316 stainless steelBrushed satin30010503Flat3 lower screws
ItemReference configuration
Material reference304 or 316 stainless steel
Diameter and heightØ219 or Ø300 mm with a 1050 mm reference height. Custom heights are available.
Top and wallFlat cap and 3 mm wall for both reference models.
FinishBrushed satin. The supplier graphic lists 180- or 280-mesh polished and brushed options.
Reflective filmThe supplier graphic lists a 30 mm band. Confirm colour and placement for the order.
Sleeve and fixingsPre-installed ground sleeve with three lower fixing screws. Confirm receiver, drainage and embedment on the site drawing.
CustomisationConfirm height, finish and any required branding with the selected assembly.

Dimensions from different reference assemblies should not be combined without confirmation. The approved drawing defines the supplied assembly and installation details.

Detail media

Reference photographs show the flat cap, finish and workshop samples. Confirm dimensions, receiver and fixings against the selected configuration.

Flat-top stainless steel sleeve bollard — Flat-top profile reference · Ø219 mm catalogue configuration
Flat-top profile reference · Ø219 mm catalogue configuration
Flat-top stainless steel sleeve bollard — Ø300 mm model · isolated supplier photograph
Ø300 mm model · isolated supplier photograph
Flat-top stainless steel sleeve bollard — Supplier graphic showing the flat top, stainless grades, reflective film and finish options
Supplier graphic showing the flat top, stainless grades, reflective film and finish options
Flat-top stainless steel sleeve bollard — Close-up of the flat cap edge and brushed body
Close-up of the flat cap edge and brushed body
Flat-top stainless steel sleeve bollard — Workshop views of the brushed posts and finished caps
Workshop views of the brushed posts and finished caps
Flat-top stainless steel sleeve bollard — Workshop reference: a stainless steel bollard with a single yellow reflective band.
Workshop reference: a stainless steel bollard with a single yellow reflective band.
Flat-top stainless steel sleeve bollard — Workshop reference: stainless steel bollards with twin yellow reflective bands.
Workshop reference: stainless steel bollards with twin yellow reflective bands.
Flat-top stainless steel sleeve bollard — Wide workshop-yard view of stainless steel bollards with twin yellow bands.
Wide workshop-yard view of stainless steel bollards with twin yellow bands.
Flat-top stainless steel sleeve bollard — Stainless steel bollards with yellow bands during workshop preparation.
Stainless steel bollards with yellow bands during workshop preparation.

Points to confirm

01Agree the sleeve and foundation layout before installing the receiver. Confirm drainage and clearance around the fixing screws.

02Confirm whether the listed height should be measured as the visible or overall height for your drawing, and specify the embedment separately.

03Confirm the stainless grade, surface finish, reflective band and required appearance before approval.

Compare Reference Series

Similar formats can have different materials, sections and mounting assemblies.

Reference series
Flat-top stainless steel sleeve bollard — reference photograph
QY-IGSS01 · This seriesFlat-top stainless steel sleeve bollard
Embedded galvanised or coated steel post — reference photograph
QY-BP06Embedded galvanised or coated steel post
Welded-dome in-ground steel bollard — reference photograph
QY-SR09Welded-dome in-ground steel bollard
Galvanised in-ground steel bollard — reference photograph
QY-CS08Galvanised in-ground steel bollard
Reference sizeØ219 / 300 mm · 1050 mm reference height · 3 mm wallØ76 / 89 / 114 / 140 / 165 mm · coated Ø219 mm optionØ114–219 mm · 1400 mm nominal post height · 150 mm embedment referenceØ89 / 114 / 140 / 165 mm · 1300 mm listed height · Ø219 mm to drawing
Material reference304 or 316 stainless steelSteel; grade and corrosion-protection system to the agreed drawing.Steel pipe.Q235 carbon steel. Hot-dip galvanised reference finish.
Mounting / operationIn-ground sleeve with screw-retained postIn-ground embedded; footing and exposed height to drawingFixed in-ground · 150 mm embedded referenceEmbedded fixed post
Base / receiving assemblySleeve and fixings: Pre-installed ground sleeve with three lower fixing screws. Confirm receiver, drainage and embedment on the site drawing.Confirm the complete mounting assembly in the drawing.Confirm the complete mounting assembly in the drawing.Confirm the complete mounting assembly in the drawing.
Structure detailsFlat top · Pre-installed ground sleeve · Three lower fixing screwsRound steel post · Embedded lower section · Steel capRound steel tube · Welded dome top · Embedded installationRound steel tube · Embedded fixed post · Wall / tube options to table

Compare complete assemblies. Dimensions, materials and mounting details require drawing and quotation confirmation; no stock or impact rating is implied.

Application References

Supplier reference image · not a verified Qianyi project or a site-layout drawing.

Frequently Asked Questions

What should I send if the ground sleeve is already installed?

Send the receiver’s internal size and depth, the lower screw positions and the finished ground level. Include photos or a drawing so the post and existing receiver can be checked together.

How do I specify a QY-IGSS01 replacement post?

State the stainless grade, brushed finish and the Ø219 or Ø300 mm reference. Give the required visible height and send the sleeve drawing so the three lower fixings can be checked before ordering.

Can you review a different size or finish?

Send your drawing or the required section, height, wall, mounting detail and finish. Custom configurations are reviewed against the agreed specification; final supply details follow the quotation and approved drawing.

Are fixings, locks and other accessories included?

The itemised quotation defines what is supplied. List any anchors, sleeves, covers, locks, keys or other hardware you need rather than assuming that every accessory shown in a reference image is included.

What should I send for a useful quotation?

Include QY-IGSS01, quantity, the complete dimensions, material and finish, installation method, drawing revision and destination. Add packing, labelling, sample and any required testing documents so the same configuration can be reviewed.

Choose the mounting method first.

Contact & Enquiry

Discuss your configuration

Send the drawing, quantity and destination for your selected assembly, or add this series to a mixed-product enquiry list.

Product reference
QY-IGSS01
Reference dimensions
Ø219 / 300 mm · 1050 mm reference height · 3 mm wall

Contact links open a draft for you to review and send. Drawing, supply and commercial details are confirmed in the quotation.

Review your multi-product enquiry

Build your enquiry

BUILD YOUR ENQUIRYNo payment required

We confirm the final configuration in the quotation and drawing review.