STEEL BOLLARDS · PARKING & ASSET PROTECTIONqianyi0576@163.com
Application concept

Products

In-ground bollards

QY-BP06

Embedded galvanised or coated steel post

A capped round steel post for permanent in-ground boundaries. Galvanised and coated configurations share Ø76, 89, 114, 140 and 165 mm tubes. The coated range also has a Ø219 mm option.

Key Features

  • Round steel post
  • Embedded lower section
  • Steel cap
  • In-ground embedded; footing and exposed height to drawing
Model 3 reference series
Download Specification & range files

Reference files for quotation. An approved product drawing is agreed separately.

Enquire about this product

Product Details

Description

A capped round steel post for permanent in-ground boundaries. Galvanised and coated configurations share Ø76, 89, 114, 140 and 165 mm tubes. The coated range also has a Ø219 mm option.

An embedded post needs a clear distinction between the visible height and the length below ground. Bring both dimensions into the installation drawing.

  • Exposed height and overall post length
  • Embedment, foundation and buried-service conditions
  • Cap detail, corrosion protection and ground finish

Confirm the selected factory cap profile, original colour, joining and finishing method, and any handle or ring against the assembly drawing. The pictured configuration and the reference specification should be reviewed together.

Product Specifications

Reference configurations for quotation. Final dimensions, materials and supply are subject to drawing and quotation confirmation.

ParameterPublished referenceConfiguration review
Stated height options1200 / 1500 mmSource does not identify total versus exposed height
Shared tube diameters76 / 89 / 114 / 140 / 165 mmAvailable reference across both finish pages
Additional coated tube option219 mmListed on the coated page only
Wall options3 / 4 / 5 mmSelect wall and tube together
TopSteel capCap construction to selected photograph
Finish optionsHot-dip galvanised; yellow powder-coated referencesConfirm single or combined treatment
ItemReference configuration
Material referenceSteel; grade and corrosion-protection system to the agreed drawing.
Stated height options1200 / 1500 mm
Shared tube diameters76 / 89 / 114 / 140 / 165 mm
Additional coated tube option219 mm
Wall options3 / 4 / 5 mm
TopSteel cap
Finish optionsHot-dip galvanised; yellow powder-coated references

Dimensions from different reference assemblies should not be combined without confirmation. The approved drawing defines the supplied assembly and installation details.

Detail media

Reference photographs show the pictured steel assembly. Confirm the selected dimensions, mounting, original cap and finish against the agreed drawing.

Embedded galvanised or coated steel post — Digitally restored reference image of an embedded galvanised or coated steel post. Dimensions follow the selected drawing.
Digitally restored reference image of an embedded galvanised or coated steel post. Dimensions follow the selected drawing.
Embedded galvanised or coated steel post — Digitally restored reference image of an embedded galvanised or coated steel post. Dimensions follow the selected drawing.
Digitally restored reference image of an embedded galvanised or coated steel post. Dimensions follow the selected drawing.
Embedded galvanised or coated steel post — Digitally restored reference image of an embedded galvanised or coated steel post. Dimensions follow the selected drawing.
Digitally restored reference image of an embedded galvanised or coated steel post. Dimensions follow the selected drawing.

Points to confirm

01Agree the full section, mounting arrangement and finish for the chosen assembly.

02Published options are references for quotation; each supplied assembly follows its agreed drawing.

Compare Reference Series

Similar formats can have different materials, sections and mounting assemblies.

Reference series
Embedded galvanised or coated steel post — reference photograph
QY-BP06 · This seriesEmbedded galvanised or coated steel post
Reflective embedded steel road post — reference photograph
QY-SR02Reflective embedded steel road post
Welded-dome in-ground steel bollard — reference photograph
QY-SR09Welded-dome in-ground steel bollard
Galvanised in-ground steel bollard — reference photograph
QY-CS08Galvanised in-ground steel bollard
Reference sizeØ76 / 89 / 114 / 140 / 165 mm · coated Ø219 mm optionØ76 / 89 / 114 × 1000 / 1200 mmØ114–219 mm · 1400 mm nominal post height · 150 mm embedment referenceØ89 / 114 / 140 / 165 mm · 1300 mm listed height · Ø219 mm to drawing
Material referenceSteel; grade and corrosion-protection system to the agreed drawing.Steel pipe. The source title describes galvanising; its technical block lists stoving varnish. Confirm the coating system for the selected assembly.Steel pipe.Q235 carbon steel. Hot-dip galvanised reference finish.
Mounting / operationIn-ground embedded; footing and exposed height to drawingEmbedded in ground; installed projection and embedment to project drawingFixed in-ground · 150 mm embedded referenceEmbedded fixed post
Base / receiving assemblyConfirm the complete mounting assembly in the drawing.Confirm the complete mounting assembly in the drawing.Confirm the complete mounting assembly in the drawing.Confirm the complete mounting assembly in the drawing.
Structure detailsRound steel post · Embedded lower section · Steel capEmbedded steel tube · Reflective bands · Three tube diameter optionsRound steel tube · Welded dome top · Embedded installationRound steel tube · Embedded fixed post · Wall / tube options to table

Compare complete assemblies. Dimensions, materials and mounting details require drawing and quotation confirmation; no stock or impact rating is implied.

Application References

Supplier reference image · not a verified Qianyi project or a site-layout drawing.

Frequently Asked Questions

Which height should I specify for an embedded post?

State the exposed height, below-ground length and overall length separately. Include the intended foundation and ground-finish detail for installation review.

Can you review a different size or finish?

Send your drawing or the required section, height, wall, mounting detail and finish. Custom configurations are reviewed against the agreed specification; final supply details follow the quotation and approved drawing.

Are fixings, locks and other accessories included?

The itemised quotation defines what is supplied. List any anchors, sleeves, covers, locks, keys or other hardware you need rather than assuming that every accessory shown in a reference image is included.

What should I send for a useful quotation?

Include QY-BP06, quantity, the complete dimensions, material and finish, installation method, drawing revision and destination. Add packing, labelling, sample and any required testing documents so the same configuration can be reviewed.

Contact & Enquiry

Discuss your configuration

Send the drawing, quantity and destination for your selected assembly, or add this series to a mixed-product enquiry list.

Product reference
QY-BP06
Reference dimensions
Ø76 / 89 / 114 / 140 / 165 mm · coated Ø219 mm option

Contact links open a draft for you to review and send. Drawing, supply and commercial details are confirmed in the quotation.

Review your multi-product enquiry

Build your enquiry

BUILD YOUR ENQUIRYNo payment required

We confirm the final configuration in the quotation and drawing review.