State the section precisely.

Start with the outside diameter of a round tube or the width and depth of a square section. A nominal pipe designation may differ from its actual outside diameter. If you use an imperial pipe standard, include that standard with the dimensions. For wall thickness, give a measurement or identify the applicable gauge standard; a gauge number by itself can be ambiguous.

Give each height a clear name.

For an embedded post, separate the finished above-ground height from the overall steel length. For a removable arrangement, distinguish the post length, the height when located in its receiver, and the sleeve depth. A single number labelled “height” may describe different parts of those assemblies.

For a folding design, add the upright height and the maximum height when folded. For U-shaped guards or open equipment frames, state overall width, height and the clear distance between legs separately. These details help identify the complete configuration before price comparisons begin.

Describe the base or receiver.

For a surface-mounted post, specify whether the base is round or square, its outline size and thickness, the fixing-hole diameter, and the hole-centre layout. A dimensioned sketch is preferable to estimating these from a photograph. Make the orientation of a rectangular plate clear.

For a removable post, identify the receiving shoe or sleeve dimensions and cover arrangement. State whether the receiver, lock, keys and fixings need to be supplied together. A base assembly height should not be mistaken for the thickness of a single plate.

Include the details that affect the finished item.

Add the material grade, top-cap design, handle, lock type and key arrangement. Define the preferred coating, colour and reflective-band positions. For a U-bar or frame, distinguish overall width from the clear distance between legs; include the bend and foot details on the drawing.

Keep one controlled reference.

Attach the drawing revision, quantity per configuration and delivery destination. Mark dimensions that are still open for discussion. The written quotation and approved drawing should refer to the same item and revision. If a dimension changes, review the related base, accessories, packing and installation requirements rather than changing only the product title. Catalogue dimensions remain a starting point until the full configuration is confirmed.

Compare Reference Series

Bring your requirements together.

Use the checklist to capture the details, then add a drawing to your email or WhatsApp conversation.

All buyer resources