Start with how the space will work.
Before comparing diameters, decide whether the boundary stays in place or opens for access. A permanent warehouse corner and an occasionally used driveway have different operating requirements. Describe the site, the intended users and the space that must remain clear. A simple layout sketch often explains more than a product photograph.
For a permanent boundary.
A bolt-down post uses a base plate fixed at the surface. Include the plate outline, thickness, fixing-hole diameter and hole positions in the enquiry. The supporting surface and anchor design need to suit the site; the post diameter alone does not establish suitability.
An in-ground post extends below the finished surface. State both the required exposed height and overall length. Identify any anchoring lugs, crossbar or filling requirement. Footing dimensions and installation details require the appropriate project review rather than a generic catalogue assumption.
For occasional access.
A removable post is lifted from a surface shoe or embedded sleeve. Confirm the lock arrangement, key plan and lifting handle. Ask what remains above ground when the post is removed, whether the receiving part has a cover, and where the removed post will be stored. The sleeve or shoe should be itemised with the post.
A fold-down post stays attached to a hinged base. Check the folded clearance and direction of movement against the available space. Upright height, tube height and folded height are separate measurements. State whether the design uses an integrated key lock or a separate padlock.
Review heavier sections and performance separately.
A heavier steel section is still part of a complete installed assembly. Specify the tube, anchoring, footing and site requirements together. A heavier steel section alone does not establish an impact or crash rating. Any requested tested performance needs evidence for the exact proposed product and installation.
Make the enquiry specific.
Send the operating choice with the section, height, quantity and destination. Ask for the complete assembly drawing and a list of included accessories. An installation label or application description is not a tested impact rating: any required performance must be specified and supported for the proposed assembly.
Compare Reference Series
- Round-base fixed steel bollard · QY-CS07
Surface mounted - Flat-cap in-ground steel bollard · QY-CS11
Embedded fixed post - Flat-top stainless steel sleeve bollard · QY-IGSS01
In-ground sleeve with screw-retained post
Bring your requirements together.
Use the checklist to capture the details, then add a drawing to your email or WhatsApp conversation.
